PORSCHE 356 B EXHAUST HEADER
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Their newly designed mufflers are hand built with high quality materials to give you years of performance for your Porsche c2/4. All of their mufflers are constructed with t304 stainless steel with radiused end-plates, and gussetted joints for superior strength. Twin inlet mufflers, designed specifically for b&b headers, have a special slip-joint absorbing expansion and contraction during times of severe heat. Special race and street applications for your Porsche c2/4 are available with your choice of tips styles. Billy boat performance exhaust has a deep commitment to build quality products. With over 3 generations of fabrication and racing experience going into the development of every part that b&b makes, al...(choose a part on the right to read more)
General Fitment 911 1989-94
$1,640.68
Make a selection
Fabspeed;s performance headers are perfect for the 987.2 owner looking for more power across the entire rpm range and a more aggressive exhaust sound. Their 304 stainless system consists mandrel bends that are optimized for maximum flow. These fabspeed headers remove the cats for even more performance gains.
Features
Fits all 987.2 Boxster/Cayman/spider vehicles 09-12
Gaskets included.
Equal length t304 stainless steel c.n.c. Mandrel bent header pipes for better torque and equalized engine pulsing and maximum exhaust flow.
F1/nascar/indycar style high velocity merge collectors.
More power and torque across the rpm band and dramatically improved sports car sound.
Si...(choose a part on the right to read more)
General Fitment BOXSTER 2009-11 CAYMAN 2009-12
$2,612.45
Make a selection
Product details:
Complete high performance exhaust system provides loud & aggressive cup car sound with dual outlets
Features:
-fits all Porsche 911 Carrera vehicles (1976-1989)
-major improvement in power throughout the rpm range.
-saves 43 lbs from the rear of the vehicle
-loud and aggressive cup car sound. Recommended for track use only!
-constructed from high quality 14-16 gauge, c.n.c. Mandrel bent t304 stainless steel tubing
-rsr long-tube headers feature equal length primary pipes with f1 style high velocity 3-into-1 pyramidal investment cast merge collectors
-dual outlet system comes with all required hardware
-available optio...(choose a part on the right to read more)
General Fitment 911 1974-77 911 1978-83 911 1984-86 911 1987-89
$3,045.00
Make a selection
Product details:
Direct replacement for restrictive factory headers; optimized for increased flow and quicker turbo spool
Features:
-fits all 911 turbo 930 vehicles (1976-1989)
-improves power delivery much sooner in the rpm range compared tot he restrictive OEM heat exchangers
-constructed from 14-16 gauge, c.n.c. Mandrel bent t304 stainless steel with high velocity 3-in-1 pyramidal investment cast merge collector for improved exhaust scavenging.
-this system will include a drip accumulator with double swivels and aeroquip lines with adapters and a graphite steel layered gasket for the drip accumulator.
-7/8” ...(choose a part on the right to read more)
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94
$3,136.25
Make a selection
Fabspeed for years has manufactures the worlds highest quality "maxflo" t304 stainless steel exhaust systems, carbon fiber style high performance air intake systems and more for Porsche, ferrari, maserati and lamborghini cars. All parts have been dyno tested and are street and track proven.
Fabspeed is now offering their new performance package for the Porsche 911 turbo and now through vivid racing is available world wide. The performance package includes technology such as exhaust headers, dual maxflo mufflers and air intake.
All fabspeed manufactured products are direct replacements to oem, which restrict performance and are prone to fail. The fabspeed performance package provides an increase in...(choose a part on the right to read more)
General Fitment 930 1975-77
$5,173.02
Make a selection
Product details:
Loud & aggressive sports car sound with adjustable single or dual outlets
Features:
-fits all Porsche 964 c2, c4, rs america, euro rs and speedster vehicles 1989-199
-increases horsepower and torque by 24 whp and 21 ft-lbs without optional sport cats expect a great increase in power when including them.
-loud & aggressive sports car sound. Recommended for aggressive street and track usage.
-rsr-style 1 piece equal length mandrel-bent header tubes with f1 style high velocity 3-into-1 pyramidal investment cast merge collectors.
-constructed from 14-16 gauge t304l stainless steel
-dual outlet muffler system comes with all r...(choose a part on the right to read more)
General Fitment 911 1989-94
From $2,595.00
Make a selection
Equal-length performance headers improve exhaust flow and sports car sound; sport headers include 200-cell hjs sport catalytic converters.
Features:
Includes 200-cell hjs sport catalytic converters for maximum performance
General Fitment BOXSTER 1997-04
$1,957.70
Make a selection
Product details:
Equal-length performance headers improve exhaust flow and sports car sound; sport headers include 200-cell hjs sport catalytic converters.
Features:
-fits all 986 Boxster / s vehicles (1997-2004), slight modifications to the factory coolant line are required on vehicles equipped with a tiptronic transmission.
-includes 200-cell hjs sport catalytic converters for maximum performance
-adds 8 whp and 4 ft-lbs of torque when installed with fabspeed’s maxflo performance exhaust system
-equal length cnc mandrel-bent primary tubes and f1-style high velocity merge collectors ensure maximum flow characteristics
-simple ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
From $2,895.00
Make a selection
Brombacher stainless steel exhaust system for the 997-2 facts: - equal length headers with long tube design - cat bypass - 2 3/4 tubing (70mm) - sealing cone style connections and quick release clamps - 4 x 3.5 (90mm) round tips - made in Germany -+ 28 hp & + 20 lb.-ft torque gain with exhaust system only. - weighs 72 lbs.(33,0 kg). The stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg). Figures: genuine: engine - 6 cylinder boxer capacity - 3800ccm compression ratio - 12,5:1 max. Power - 283kw (385hp) @ 6500rpm max. Torque - 420nm (310lbf ft) @ 4400rpm max. Speed - 300km/h max. Rpm - 7500rpm acceleration 0-100km/h - 4.5s level 3 tuning (includes FVD software, sport airfilter and exhaust) max. Power - ...(choose a part on the right to read more)
$6,425.10
Make a selection
Fabspeed;s performance headers are perfect for the 987.2 owner looking for more power across the entire rpm range and a more aggressive exhaust sound. Their 304 stainless system features mandrel bends that are optimized for maximum flow.
Features
Fits all 987.2 Boxster/Cayman/spider vehicles 09-12
Gaskets included.
Equal length t304 stainless steel c.n.c. Mandrel bent header pipes for better torque and equalized engine pulsing and maximum exhaust flow.
F1/nascar/indycar style high velocity merge collectors.
More power and torque across the rpm band and dramatically improved sports car sound.
Simple and easy direct bolt-on replacement headers for all stock 987 headers....(choose a part on the right to read more)
General Fitment BOXSTER 2009-11 CAYMAN 2009-12
$3,921.95
Make a selection
Product details:
Equal-length performance headers improve exhaust flow and sports car sound; sport headers include 200-cell hjs sport catalytic converters.
Features:
-fits all Porsche 987 Boxster/Cayman vehicles (2005-2008)
-includes German-imported 200-cell hjs sport catalytic converters for maximum performance
-constructed from equal-length t304 stainless steel c.n.c. Mandrel-bent tubing for improved torque and equalized engine pulsing
-more power and torque across the rpm band and dramatically improved sports car sound
-composite gaskets are included for a leak proof seal
-direct replacement for the OEM headers with no cutting or welding ...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 CAYMAN 2006-08
From $2,895.00
Make a selection
Fabspeed's 991 Carrera performance package replaces the restrictive OEM side mufflers and center muffler for a deeper, throatier exhaust note and improved power and throttle response. The included sport headers replace the restrictive factory headers and cats with high-flowing performance headers and 200-cell hjs sportcats. Lastly, the restrictive factory airbox is replaced by fabspeed's carbon fiber competition intake system which increases the cold air flow into the engine for better power and sound.
Features:
Saves 11.45 lbs. / 5.2 kg
Dramatic improvement in sports car sound and power throughout the rpm range
Constructed from high-quality 14-16 gauge c.n.c. Mandrel bent t304l st...(choose a part on the right to read more)
General Fitment 911 2009-12
$9,421.85
Make a selection
Fabspeed's performance package for the 991 Carrera vehicles saves 11.45+ pounds from the vehicle and improves exhaust flow and power by replacing the factory headers, center muffler, side mufflers, and air box.
Fabspeed's 991 Carrera performance package replaces the restrictive OEM side mufflers and center muffler for a deeper, throatier exhaust note and improved power and throttle response. the included sport headers replace the restrictive factory headers and cats with high-flowing performance headers and 200-cell hjs sportcats. lastly, the restrictive factory airbox is replaced by fabspeed's carbon fiber competition intake system which increases the cold air flow into the engine for better power a...(choose a part on the right to read more)
General Fitment 911 2009-12
$9,227.59
Make a selection
Product details:
Full exhaust system developed for track use provides an aggressive exhaust note while adding horsepower, torque, and throttle response; available as single or dual outlet and with or without heat exchange.
Features:
-fits all Porsche 993 Carrera vehicles (1994-1998)
-loud and aggressive cup car sound. Recommended for track use only.
-this system can be ordered in single- or double- outlet form; cap is provided for single-outlet use. Please specify.
-maintain your factory in-cabin heat with the optional heat exchange on the headers. Please specify.
-saves 43 from the rear of the vehicle when configured with heat option and saves 47 when config...(choose a part on the right to read more)
General Fitment 911 1994-98
From $2,795.00
Make a selection
Product details:
High-quality performance headers provide better boost response and power throughout the rpm range.
Features:
-fits all 993 turbo / turbo s vehicles (1995-1998)
-increases horsepower by 15 whp and improves throttle response
-saves 9 lbs from the rear of the vehicle
-available with or with out heat exchange
-features high velocity 3-into-1 pyramidal inverted cast merge collectors for improved exhaust scavenging.
-constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
-all fabspeed performance products are backed by the fabspeed lifetime ...(choose a part on the right to read more)
General Fitment 911 1994-98
From $1,895.00
Make a selection
Fabspeed's complete high performance exhaust solution is a fantastic daily driveable sound and power; from fabspeed's supercup exhaust system, sportcat x-pipe, sport headers with heat, cup high performance air box cover, bmc f1 air filter and ecu tuning upgrade.
Features:
Constructed from high quality t304 stainless steel cnc mandrel bent primary tubes for maximum power and exotic sports car sound
General Fitment 911 1994-98
$10,580.63
Make a selection
Product details:
High-quality performance headers provide better boost response and power throughout the rpm range, gaskets included.
Features:
-fits all Porsche 996 GT2 vehicles (2001-2005)
-increases horsepower and torque by 12 whp and 14 ft-lbs
-features 3-into-1 high velocity merge collector
-equal length tubing for improved exhaust travel
-constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
-direct replacement for factory headers
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 TURBO/GT2 2001-05
From $1,595.00
Make a selection
Product details:
Equal-length headers provide improved torque and equalized engine pulsing thanks to industry-exclusive mandrel-bent primary tubes, gaskets included.
Features:
-fits all Porsche 996 Carrera vehicles 1998-2005
-improves horsepower and torque by 15 whp and 12 ft-lbs
-saves 2 lbs from the rear of the vehicle
-one piece cnc mandrel-bent primary tubes provide maximum uninterrupted flow
-f1-style merge collectors provide optimized exhaust scavenging
-improves power and torque throughout the rpm range
-direct replacement for the factory headers
-simple diy bolt-on installation
-all fabspeed performance products are backed by the fabspeed life...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05 911 1998-05
From $1,595.00
Make a selection
Fabspeed's 996 Carrera performance package replaces the restrictive OEM mufflers and factory cats with high-performance mufflers and 200-cell hjs sportcats for a deeper, throatier exhaust note and improved power and throttle response. the included performance headers replace the restrictive factory headers and with high-flowing motorsport headers. lastly, the restrictive factory airbox is replaced by fabspeed's carbon fiber competition intake system which increases the cold air flow into the engine for better power and sound.
Includes:
Maxflo performance mufflers
General Fitment 911 1998-05
$8,839.13
Make a selection
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggressive sound similar to the 997 cup c...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,996.00
Make a selection
General Fitment 911 2009-12
$2,350.55
Make a selection
Product details:
Performance headers improve exhaust flow and sports car sound; sport headers include 200-cell hjs sport catalytic converters.
Features:s
-fits all Porsche 997.2 Carrera vehicles 2009-2011
-improves power by 13 whp and 16 ft-lbs. Of torque at 4500 rpm
-saves 4 lbs from the rear of the vehicle
-includes German-imported 200-cell hjs sport catalytic converters for maximum performance
-investment-cast f1/alms/nascar high-velocity 3-into-1 merge collectors for maximum performance
-constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
-direct replacement for the restric...(choose a part on the right to read more)
General Fitment 911 2009-12
From $2,995.00
Make a selection
Complete high-performance exhaust & intake solution for the 997.2 turbo.
Includes:
997.2 turbo/turbo s supersport x-pipe
997.2 turbo/turbo s sport headers
997.2 turbo/turbo s sport catalytic converters
997.2 turbo/turbo s deluxe quad style tips - polished chrome or black chrome
997.2 turbo/turbo s competition air intake
Features:
Fits all Porsche 997.2 turbo / turbo s vehicles (2010-2012)
Dramatic improvement in sports car sound and power throughout the rpm range
Includes high performance 200-cell hjs sport catalytic converters for improved flow and exhaust sound
Constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
Sp...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2010-13 911 2009-12
From $6,750.00
Make a selection
Product details:
Complete header-back performance exhaust system for 997 Carreras fitted with a GT3 bumper kit; package includes maxflo performance mufflers, sportcat x-pipe, and GT3 outlet extension tips.
Features:
-fits all Porsche 997 Carrera vehicles from 2005-2008
-system maintains the original 997 Carrera exhaust/muffler position but features longer outlet extensions with slip-on 3.5” polished tips which exit at the center of GT3-style bumpers
-constructed from 14-16 gauge t304 stainless steel
-simple diy bolt-on installation; no cutting or welding required
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 2005-08 911 GT3 2007-11
$4,195.00
Make a selection
Product details:
Complete high-performance exhaust solution for the Porsche 997 GT3 / GT3 rs; fantastically daily drivable sound and power from fabspeed's center mini maxflo mufflers, sport performance headers, side muffler bypass pipes, carbon fiber competition air intake for GT3 models / bmc air filter for GT3 rs models, deluxe dual style tips, and ecu upgrade.
Includes:
997 GT3 / GT3 rs center mini maxflo mufflers
997 GT3 / GT3 rs sport performance headers
997 GT3 / GT3 rs side muffler bypass pipes
997 GT3 / GT3 rs carbon fiber competition air intake (gt3)
997 GT3 / GT3 rs deluxe dual...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$7,750.00
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|